TransXChange

Examples 2.0 - Hail & ride route

Summary

  • Use of Hail and Ride sections
  • Route with Hail and Ride only sections, Non-Hail and Ride stops and mixed stops
  • Full lollipop
  • Short Notice Registration
  • Some locally defined stops
  • FrequentService, specified as minutes past the hour

Published as: Hail & ride PDF

Route Map

Hail & ride route image

Timetable
    Journeys
Stops   #1
Seaview Road   10:10 And then at 10 and 42 minutes past the hour until 1642 19:00
South Heighton   10:30 9:30
Newhaven Centre   10:40 20:10
Northdown Road Hail & Ride section 10:50 19:40
Gibbon Road Hail & Ride section 11:00 19:50
Fortis Road Hail & Ride section 11:10 20:00
Newhaven Centre   11:20 20:10
South Heighton   11:30 20:20
Seaview Road   11:50 20:40


The XML Representation

XML Document

Service Registration

  • The Registration is for a single Operator.
  • The Registration is circulated to three authorities.
  • It has ShortNoticeRegistration details specified as well.

Service Structure

  • Here is a single Service instance SV1, with one Line - 'L1', with LineName 'H145'.
  • There are six StopPoint instances:
    • Three fixed stops: Seaview Road, South Heighton, Newhaven Centre
    • Three HailAndRide section stops: Northdown Road, Gibbon Road Fortis Road. Gibbon Road also has a fixed stop.
  • There are three RouteSection instances:
    • rs_b1 connecting the outward handle of the lollipop.
      • There are two RouteLink instances rl_b5, rl_b6, running Seaview Road - South Heighton - NewHaven Centre
    • rs_b2 connecting the hail and ride stops in the lollipop ring.
      • There are four RouteLink instances rl_b1 - rl_b4 , running NewHaven Centre - South Heighton - Seaview Road
    • rs_b3 connecting the return handle of the lollipop.
      • There are two RouteLink instances rl_b7 rl_b8, running NewHaven Centre - South Heighton - Seaview Road
  • There is a single Route r_b1 containing the route sections rs_b1, rs_b2, rs_b3.
  • There are three JourneyPatternSections:
    • js_b1 covering the outbound traversal of rs_2.
      • There are two JourneyPatternTimingLink instances, jptl_b5 , jptl_b6, each referencing the corresponding route link.
    • js_b2 connecting the hail and ride stops in the lollipop ring.
      • There are four JourneyPatternTimingLink instances, jptl_b1 -j ptl_b4, each referencing the corresponding route link. The links are marked as Hail And Ride links.
    • js_b3 covering the return traversal of rs_2.
      • There are two JourneyPatternTimingLink instances, jptl_b7 , jptl_b8, each referencing the corresponding route link.
  • There is a single JourneyPattern, jp_b1, that follows route r_b1.
  • There are two VehicleJourney instance,s based on JourneyPattern jp_b1:
    • VJ_1, follows JP1 without any changes to the timings on the JourneyPatternTimingLink instances. It has a start time of 10.00. It has a frequent service of every 10 and 42 minutes past the hour, and an end time of 16:42. Journeys will be created that start at 10 and 42 minutes past the hour up to a last departure of 16:42.
    • VJ_2, follows JP1 without any changes to the timings on the JourneyPatternTimingLink instances. It has a start time of 19.40.

The Operating Days

  • The service OperatingProfile says it runs Monday to Friday every day of the year.

Hail And Ride

Hail & ride route image


Page last updated: 2005/11/01

UKGovTalk logo