TransXChange

Examples 2.1 - Lollipop route

Summary

Same stops covered by two different routes in different directions in a partial lollipop. See also Hail and Ride for a full lollipop topology.

  • Lollipop route, with two journeys proceeding round the loop in opposite directions (In this example neither route completes the full lollipop course)
  • Two services run by two different operators, sharing a line label.
  • Two different physical routes with the same line label.
  • Timing status on stop usage other than 'Principle Timing Point (PTP)
  • Additional operating days for regular and bank holiday operation
  • Express stopping pattern for some journeys.
  • Use of Stop Sequence Numbers
  • Use of Dynamic Destination headings
  • Reuse of shared sections.
  • Reuse of VehicleJourney Link
  • Layover Point
  • General Schema

Published as PDF:

  • PDF general: Withpublish lollipop.xml -full TransXchange publisher option (includes all stops)
  • PDF vosa: With publish lollipop.xml -vosa TransXchange publisher option (includes only stop usages with a timing status of 'PTP' )

Route Map

Lollipop route image

Timetable

Bus Station To Exchange

Column #1 #2 #3 #4 #5
Operator ACO ACO ACO RED ACO
Line 1B 1A 1B 1B 1B
Bus Station 15:55 16:15 16:35 16:40 16:55
High St       <16:46  
Robridge   16:26      
Barford 16:09 16:29 16:49 16:54 17:09
Egham 16:12   16:52 16:57 17:12
Pulford 16:15   16:55 17:00 17:15
Exchange 16:32 16:52 17:12   17:32
School   16:53   17:16  
Exchange       17:17  


The XML Representation

XML Document

Service Registration

  • The service is not registered
  • There are two Operator instances, 'ACO'. and 'RED'

Service Structure

The detailed map below shows the sections and stop sequences used.

  • There are two Serviceinstances whose Lines are labelled to appear to the public as the same:
    • S1, which has two Line instances; L1, labelled 'L1A', andL2, labelled 'L1B' S1 is run by Operator 'ACO'
    • S2 which has Line L3 also labelled 'L1B'. S2 is run by Operator 'RED'
  • There are three RouteSectioninstances;
    • RS1: 'Bus Station' to 'Pulford', containing RouteLink instances RL1 to RL5
    • RS2: 'Pulford' to 'School ' via 'Exchange', containing RouteLink instances RL6 and RL7
    • RS3: 'Pulford' to 'Exchange' via 'School', containing RouteLink instances RL8 and RL9.
  • There are two Routeinstances:
    • R1: 'Bus Station to School (via Exchange)', containing RS1 and RS2.
    • R2: 'Bus Station to Exchange (via School)', containing RS1 and RS3.
  • There are three corresponding JourneyPatternSection instances, JS1, JS2 and JS3, one for each route section.
    • Egham is not a 'Principle Timing Point' ('PTP'), so for the call at Egham the JourneyPatternTiminkLink has an override TimingStatus of 'Timing Information Point' (''TIP')
  • S1 has two JourneyPatterninstances:
    • JP1: Following Route R1, with sectionsJS1 andJS2, passing 'Pulford' without stopping
    • JP2: Following Route R2, with sectionsJS1 andJS3.
  • S2 has one JourneyPatterninstance:
    • JP3: Also following Route R2, with sectionsJS1 andJS3, passing 'Pulford' without stopping. It contains two named layover points lay_1 and lay_2.
  • There are five VehicleJourney instances, one for each colum
  • S1 has three VehicleJourney instances:
    • VJ1: following JourneyPattern JP1 over Route R1, 'Bus Station to School (via Exchange)' , as Line 'L1B', passing 'High Street' and 'Robridge', without stopping. Short working of the second section, i.e. termination at Exchange, is indicated by a dead run.
    • VJ2: also following JourneyPattern JP1 over Route R1, 'Bus Station to School (via Exchange)' but as Line 'L1A', passing 'High Street', 'Egham' and 'Pulford' without stopping
    • VJ3: reuses the timing links of VJ1, and so also follows JourneyPattern JP1 over Route R1, 'Bus Station to School (via Exchange)'
    • VJ5: reuses the timingg links of VJ1, and so also follows JourneyPattern JP1 over Route R1, 'Bus Station to School (via Exchange)'
  • S2 has one VehicleJourney instance:
    • VJ4: following JourneyPattern JP3 over Route R2, 'Bus Station to Exchange (via School)', as Line L3 , which has the same label of 'L1B' as S1/L2 , although it actually goes round the last two stops in a different sequence from the other journeys with the same label, and so needs a different underlying Route. VJ4 passes 'Robridge', without stopping

Operating Days

  • The Service operating period for SV_1 starts on01/01/2004 for all vehicle journeys, and continues until 13/06/2005
  • The OperatingProfile for the Service SV_1 states values that apply to all journeys unless overridden on a journey pattern or individual vehicle journey.
    • The RegularDayType DaysOfWeek specifies journeys of the service by default runs Monday to Saturday throughout the year
    • The BankHolidayOperation / DaysOfOperation states journeys of the service run on Jan2ndScotland, MayDay, EasterMonday, SpringBank, AugustBankHolidayScotland, ChristmasDayHoliday, BoxingDayHoliday and ChristmasEve.
    • The BankHolidayOperation / DaysOfNonOperation states journeys of the service do not run on ChristmasDay, BoxingDay, GoodFriday, NewYearsDay, NewYearsDayHoliday and NewYearsEve.
  • The Vehicle Journeys VJ1 and VJ5 have a different set of day type specified
    • The RegularDayType DaysOfWeek specifies journeys of the service run Monday, Wednesday, Friday, Sunday throughout the year
  • The Service operating period for SV_2 starts on 01/01/2004 for all vehicle journeys, and continues until 13/06/2005
  • The OperatingProfile for the Service SV_2 states values that apply to all journeys unless overridden on a journey pattern or individual vehicle journey.
    • The RegularDayType DaysOfWeek specifies journeys of the service by default runs Monday to Sunday throughout the year
    • The BankHolidayOperation / DaysOfNonOperation states journeys of the service do not run on Christmas, ie ChristmasDay, and Boxing day

Use of Sections & Stop Sequence Numbers

Sections are used to reuse links between journeys.

Stop sequence numbers are used to coerce a specific ordering of the stops within a matrix timetable when published. The following diagram shows the journey pattern sections annotated with stop section numbers.

Lollipop route image


Page last updated: 2013/04/13